Tangent DAC II Manual Del Usuario página 5

Connect Your Device:
Connect your power amplifier to Left and
Right RCA or XLR Output.
Use the Optical input by connecting a
device using a optical fiber cable to the
Optical Input 1 or 2.
Use the COAX input by connecting a CD
tranport or other unit to using a coax ca-
ble to the Optical Input 1 or 2.
Use the USB input by connecting a Com-
puter to play music using a USB cable to
the USB input.
Note:
Remember to change into the desired
input source on the DAC II.
Standby Mode:
Standby ON: Only BT input can wake on signal
Standby OFF: All inputs can wake on signal
Note: Power consumption is higher in OFF mode.
OFF mode: 1.1Watt
ON mode: Below 0.5Watt
SpecificationS
MODEL
Bluetooth
DAC
USB
Optical Input
Optical Output
Headphone output
Standby function
Standby powerconsumption
Mains Voltage
Dimensioner (BxDxH) mm
Weight
(UK)
Tangent DAC II
Qualcomm QCC3031 Bluetooth v5.0 APTX-HD
Sabre ES9023 24-Bit Stereo Audio DAC
192kHz / 32-bit PCM (Stereo) -
Support DSD audio 64/128/256/512
192kHz / 24-bit
192kHz / 24-bit
6,35mm & 3,5mm
Autostandby after 15min without signal
< 0,5W standby (EUP 2013)
100-240V AC 50/60Hz
195 x 194 x 70mm + feet and connectors
1.3 KG