Auto Mate 5304A Manual Del Usuario página 16

Advanced Commands: (Level 2)
Press and release the
Sensor Bypass
Press and release
The parking lights fl ash each time this command is received to indicate
the Sensor bypass type. 2 fl ashes indicates sensor Warn-away zones
are bypassed.
fi rm. 3 fl ashes indicates sensor Warn-away and Full Trigger zones are
bypassed.
BYPASS FULL
fl ash indicates sensor bypass is Off,
to confi rm..
Note System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.
Remote Valet
Press and release
Enters (or if On, exits) Valet Mode. The
On, 2 for Off) play to confi rm and the System Status icons update.
See Valet Mode for more details
AUX 2
Press and release
Activates (or if On, deactivates) the Aux 2 output. The
text and On tones or Off tones play to confi rm.
© 2012 Directed. All rights reserved.
button 2 times.
, 1 beep and 1 fault tone play to con-
BYPASS WARN
, 1 beep and 2 fault tone play to confi rm. 1
AUX
and 1beep play
BYPASS OFF
text and beeps (1 for
VALET
ALL
1
level 2
AUX CHANNEL
13