14
8. Faults
Before performing any repairs, maintenance or cleaning, disconnect Hose from compressed air
supply.
en
Fault
Hose not reeling in
fully.
Leaks
9. Technical data
Designation
Maximum working pressure
Material of hose
Temperature range
Hose internal diameter
Usable hose length
Connection thread
Weight
Width×depth×height
10. Cleaning
Before cleaning, disconnect all connections, relieve hose of pressure. Wipe all dirt or caking off
outside of hose with a cloth soaked in warm, clean water.
Do not use chemical, alcoholic, abrasive or solvent-based cleaning agents.
11. Transport and storage
Store in the original packaging or box, protected from light, free of dust in a dry place.
12. Disposal
Comply with the national and regional environmental protection and disposal regulations for cor-
rect disposal or recycling. Segregate items into metals, non-metals, composite materials and con-
sumables and dispose of them responsibly.
13. Spare parts
Order original spare parts from the Hoffmann Group Customer Service.
Possible cause
Hose jams or catches
when reeling in.
Connections or as-
semblies loose or
unfastened.
Hose or component
damaged.
Instruction manual
Action
Extend Hose to full
length, allow it to reel
in freely.
Identify defective
component.
Shut off upstream
valve, relieve hose
reel or pressure.
Retighten connec-
tions, assembly.
Replace hose if dam-
aged.
Value
300 psi/20 bar
Hybrid polymer
-40°C to +60°C
3/8 inch/10 mm
15 m
3/8 inch BSPT
6.6 kg
465 mm x 220 mm x 400 mm
Performed by
Trained person
Trained specialist for
mechanical work
Contact Hoffmann
Group customer ser-
vice.