Logitech ZONE VIBE 125 Guía Rápida página 10

CHARGING
To conserve battery life, headphones automatically
power off after 30 minutes without usage.
Sleep timer could be adjusted in Logi Tune.
The LED light on the headphones will blink slowly
in RED when the battery is low.
Charging via USB cable
1. Plug the USB-C cable end into the USB-C port on
the bottom of the earcup.
2. Plug the USB-A end into the USB-A charging port on
your computer or AC adapter.
3. The LED light will start breathing white when charging.
4. The LED light will turn solid white when fully charged.
– 2 hours will fully charge the battery.
– 5 minutes will give you 1 hour of playback.
Battery life may vary based on user, environment,
and computing conditions.
5. The headphones can be used with the receiver
and Bluetooth paired while charging.
®
LOGI TUNE
Logi Tune helps boost your headphones performance
with periodic software and firmware updates.
It is recommended to update both your headphones
and receiver. To do so, download Logi Tune from
www.logitech.com/tune
9 English