Logitech ZONE VIBE 125 Guía Rápida página 7

CONNECT YOUR HEADPHONES
a. Connect via USB-A receiver
1. Insert the receiver into the computer USB-A port.
Or insert the USB-A receiver with the USB-C
adapter to the USB-C port.
2. Zone Vibe 125 is already paired to the receiver
it ships with.
3. Once successfully paired, the LED light on
the receiver will turn solid white.
b. Connect via BLUETOOTH
1. Slide the switch to the bottom in the arrow's
direction for 2 seconds to initiate pairing.
2. The LED light will flash white rapidly.
3. Open Bluetooth
settings on your device.
®
4. Select Logi Zone Vibe 125 in discoverable devices.
5. Once successfully paired, the LED light will turn
solid white.
ADJUSTING HEADPHONES
1. Adjust the headphones by sliding earcups up
and down the extended part of the headband.
2. It may be easier to adjust the headphones on
your head. Slide the earcups up and down the
headband until they sit comfortably on your ears.
®
USB-A
USB-C
2 sec.
LOGI Zone
Vibe 125
6 English