WARNING! Do not put foot or hand in
scissors mechanism.
◇ Push the DOWN button and the table will lower.
◇ Loose the DOWN button and the table will stop.
NOTE
◇ The table is equipped with an aluminum guard to avoid accidental
danger.
◇ If aluminum guard strikes an object while the table lowers, stop
operation and check the lift table. After making sure no any
abnormality, strike the UP button slightly and then the electric system
will function as before.
◇ Emergency stop
◇ There are two methods of emergency stop as follows.
◇ Push down the emergency stop switch and the movement of table
stops.
◇ Strike aluminum guard upward and the movement of table also
stops.
■ Transportation
If necessary, the lift table can be transported with attached ringbolts.
◇ Pay attention to the maximum capacity of lifting equipment to be
used.
◇ Keep the ringbolts with reasonableness.