Silk’n SILKYAIR PRO HCA01 Manual De Usuario página 11

3. Check whether the product or individual parts are damaged. If
EN
this is the case, do not use the product. Contact our customer
service.
5 Operation
• Clean all parts of the product before first use as
• The product may emit a slight smell when it is first
• Always hold onto the handle
1. Connect the mains cord
socket.
2. If necessary, attach one of the attachments (concentrator
or diffuser
The attachments magnetically fix to the air outlet.
3. To switch the product on, slide the on/off switch
middle position (ON).
4. To change the operating temperature, press the temperature
button
65, 75, 85 or 98 °C) is selected.
The operating temperature shows in the temperature
indicator
5. To change the operating speed, press the speed button
repeatedly until the desired speed (3 levels) is selected.
One or more speed indicators
selected speed level (1–3).
6. For a shot of cool air, press and hold the cool shot button
The cool air indicator
activated. Release the button to cancel this function.
7. To lock the selected temperature and speed, slide the on/off
switch to the top position ( ).
The lock icon
8. To switch the product off, slide the on/off switch to the
bottom position (OFF).
The product remembers the last temperature and speed for
your next use.
11
described in the chapter "Cleaning".
used. This is entirely safe and harmless. Ensure there is
adequate ventilation in the room.
product.
) to the air outlet
14
repeatedly until the desired temperature (39, 55,
6
of the display
10
9
illuminates when the function is activated.
12
when using the
3
to an easily accessible mains
4
(see Fig. B).
1
.
8
illuminate to show the
11
illuminates when the function is
13
to the
7
5
.
2