Thrustmaster TS-XW RACER Manual página 3

TS-XW RACER - Manual firmware update procedure (Windows®
System requirements: PC running Windows® 10 or later.
1) Connect your TS-XW RACER to one of your PC's USB ports
Please be sure to follow these instructions:
- The power connector
wheel's base.
- The power plug
o We recommend that you avoid using an extension cord, power strip or
current transformer.
- The racing wheel must be connected directly to a USB port on your
o We recommend that you avoid using a USB hub, USB extension cable
or any other type of connection extension.
Make sure that you have equipped your TS-XW RACER with an add-on wheel rim
before you power on the racing wheel.
During this procedure:
− DO NOT CONNECT OR DISCONNECT your TS-XW RACER before being
prompted to do so.
2) If you have not done so already, download and install the latest PC -
DRIVERS FORCE FEEDBACK driver on your PC.
You will find the latest driver for your device on our website, in the Drivers section:
https://support.thrustmaster.com/product/ts-xw-racer/
must be properly connected at the back of the racing
must be connected directly to a wall outlet.
Restart your computer to finalize the update.
10/11)
[Package 2023_TTRS_3]