Bike Assembly
Deploy the Product
1- Grab the seat and the handlebar. Rotate the front half of the frame forward around
the hinge until the front wheel is in the driving position.
2- Lift the locking lever (picture 1) to fully unfold the frame until you hear a click. Flip
the lever forward and close it so the frame is secured.
3- Turn the pedals to their horizontal position (picture 2).
4- Raise the handlebar to its vertical position and close its locking lever (picture 3).
5- Place the handlebar and the saddle at the desired height (picture 4 and 5).
Picture 1
Picture 4
Insert, unlock and remove the battery
1- Insert the key into the keyhole.
2- Turn the key switch to ON position when you use the
electric bike.
3- Turn the key switch to OFF position when you stop
using the electric bike.
4- Press and turn the key switch to UNLOCK to unlock
the battery for removal.
4
YOUIN AMSTERDAM
Picture 2
Picture 5
Picture 3