Publicidad
Idiomas disponibles
Idiomas disponibles
ROUGHING-IN
Turn off the water supply.
Install or relocate supplies as necessary to conform to the
roughing-in dimensions.
Dashed lines indicate items to be supplied by the installer.
Diameter of the spout hole in the deck = 1" (2.5cm).
2-1/16" D.
1/4" (6mm) TO
1-1/4" (3.2cm) MAX.
RIM OR DECK
MOUNT
1-5/16" D.
RIM OR DECK
MOUNT
INSTALLATION
2-1/2" (6.4cm)
A
1013201-2-
1/4" (6mm) TO
1-1/4" (3.2cm) MAX.
FINISHED DECK
3/4" I.D.
8" (20.3cm) MIN.
5-1/8" (13cm)
4-1/2" (11.4cm)
5"
(12.7cm)
2-1/2" (6.4cm)
SWIRL
SCROLL
Diameter of the valve hole in the deck = 1-1/2" (3.8cm).
NOTE: Reinforcing material may be required if the deck or
rim is thin. Install before proceeding.
NOTE: For installations on a rough (unfinished) deck to be
covered later with tile, the tile thickness must not exceed
1-1/4" (3.2cm).
9-3/4" (24.8cm)
6-1/2"
(16.5cm)
2-1/8" (5.4cm) MAX.
ROUGH DECK
ROUGH + FINISH DECK
MOUNT INSTALLATION
5" (12.7cm)
6-1/4"
(15.9cm)
2-1/2" (6.4cm)
KUDU
Fig. #1
2
7-1/2"
(19.1cm)
1-5/16" D.
5-3/4"
(14.6cm)
Kohler Co., Kohler, WI U.S.A.
Publicidad
