Auxiliary Input - RCA RCD378D Manual Del Usuario

• Playback capability for CD-RW discs may vary
due to variations in the quality of the CD-RW
disc and the recorder used to create the disc.
Selecting CD mode
When the unit is on, press
Play CD:
1. Press the PReSS to oPen area on the CD door
to open the lid.
2. Place a disc on the disc tray with the label side
facing up.
3. Press the PReSS to oPen area on the CD door
to close it.
• Playback begins automatically and stops when
finished.
Stop playback
1. During CD playback, press to stop playback.
Playing a tape
1. When the unit is on, press
mode is selected. The tape indicator "
appears on the display.
2. Press StoP/ eJeCt to open the tape deck
door.
3. Insert a tape into the door and push the door
closed.
note: Be sure to slide the cassette into the tape
slot on the door. Do not place the tape directly
onto the tape mechanism.
ReW or
4. Press
the desired starting position. Press
eJeCt to stop winding.
PLAy to start playback.
5. Press
• Press PAUSe to pause playback, press again
to release the button to resume playback.
• Press StoP /
note: For better recording quality, use normal
bias tape (Type I) only.
Recording to tape
from radio
1. Insert a tape into the deck.
2. Press until RADIO mode is selected.
1. Connect the auxiliary device to the AUX In jack
with an audio cable (not provided).
2. Press until the indicator "
the display.
3. Start playback from the auxiliary device.
4. Adjust the auxiliary device to mid-range volume
CD Playback
until CD mode is selected.
Tape player
until TAPE
fWD to wind the tape to
StoP /
eJeCt to stop playback.

Auxiliary input

" lights on
• The total number of tracks on the disc can be
read from display.
• In stop mode, press to begin CD playback.
Pause Playback
1. During CD playback, press to pause playback.
Press again to resume.
Skip and search
1. During CD playback, press / to skip to the
previous or next track respectively.
2. Press and hold / to search quickly current
track backward or forward respectively.
Play mode
During CD playback, press BAnD/PLAy MoDe
to select among playback mode (repeat current
track / repeat all / random). Selection made is
indicated by icons on display.
3. Press BAnD/PLAy MoDe to access the desired
radio band.
"
4. Press / to tune to the station to be recorded.
5. Press ReC and
recording.
6. Press PAUSe or
the recording respectively.
from CD
1. Insert a tape into the deck.
2. Press until CD mode is selected.
3. Insert the disc to be recorded.
4. Select the track to be recorded.
5. Press ReC and
recording.
PAUSe or
6. Press
the recording respectively.
from auxiliary input
1. Insert a tape into the deck.
2. Press until the indicator "
the display.
3. Start playback from the auxiliary device.
ReC and
4. Press
recording.
5. Press PAUSe or
the recording respectively.
and adjust the master volume by pressing
VoLUMe-/+.
• Do not turn the volume of the auxiliary device
too high as this may affect the sound quality.
• For other playback operations, control them
on your auxiliary device.
EN-5
PLAy together to begin
StoP to pause or stop
PLAy together to begin
StoP to pause or stop
"appears on
PLAy together to begin
StoP to pause or stop