Schematic Diagram For Bullet Varifocal Ip Camera - Urmet 1093/139M2 Manual De Usuario

3.2 1093/141M2
Items
Front cover
①
Camera body
②
Lens
③
Infrared lamp
④
Lens cover
⑤
Adjustment sleeve
⑥
Slant adjustment allens
⑦
Base with fixing holes
⑧
RJ45/POE cable and 12Vcc power jack
⑨
DS1093-176

SCHEMATIC DIAGRAM FOR BULLET VARIFOCAL IP CAMERA

It can prevent the IP camera from the irradiation of the sunlight.
It is fixed to the front cover through the set screw.
Lens of camera
Infrared LED lamp
It is screwed in to the camera body, it allows to access lens and led
It allows to adjust the angle of scene.
They allow to adjust the horizontal and vertical camera slant.
Fix the device at the installation location.
It allows to connect the camera to the network (status led) and power it through POE or
using 12Vcc jack
Descriptions
37