Urmet 1093/139M2 Manual De Usuario página 47

2. Image Control
Click【Display】→【Image Control】to enter the following interface.：
IRCUT Mode：4 modes: GPIO Auto, Video Auto, Color Mode and Black & White Mode.
IR-CUT Delay： IRcut delay switching time
Image setting : Adjust brightness, contrast, saturation, hue and sharpness
BLC (Back light conpensation)：Enable or disable the Back light. Back light compensation can compensate the
darkness of the subject caused by shooting against the sunlight. In some application scenario, the field of view may
contain a very bright background field, such as the door and window against the light, while the observed subject is
surrounded by the bright field. In this case, the photo is gloomy and has no layering. The backlight compensation
can be applied to solve the problem.
3D Noise Reduction：Close, Weak, Normal, Strong able or disable the video noise reduction function. Default
setting is Close.
WDR：Close, Weak, Normal, Strong able or disable WDR function.
WDR is a technology that enables the camera to catch the image features with strong contrast. In short, DR
(dynamic range) is the details of the bright part and dark part of image. The larger dynamic range shows richer
layers and broader color space.
Flip：4 modes: Close, Leftright, Updown a,d Center
White Balance：Auto, manual
Manual﹕Manually adjust red and blue gain of camera video
Auto﹕Optimize according to the current lighting conditions and screen mode and calibrate the video color of the
camera.
Iris Type：It has auto mode and manual mode. Default mode is Auto.
Time exposure：Adjust exposure level of camera.
Gain：Adjust the level of AGC(Auto, 6db, 12dB, 18db, 24dB, 30db, 36dB, 42dB)
DS1093-176 47