Setting Up And Connecting; Package Contents And Transport Inspection; Unpacking; Disposal Of The Packaging - Silvercrest SLS 2000 B2 Instrucciones De Uso

Setting up and connecting

Setting up and connecting
WARNING
Damage may occur to property and injuries to people when
operating the device!
Observe the following safety instructions to avoid dangers:
► Packaging material should not be used, by children, as a play thing. There
is a risk of suff ocation!
► To avoid risks to persons and property, observe the requirements for the
set-up location and the electrical connections.

Package contents and transport inspection

▯ Charging station SLS 2000 B2
▯ Mains power supply unit MW5CP52-1GS
▯ 12 Plug-in connection cables for 5 V
▯ This operating manual
NOTICE
► Check the contents to make sure everything is there and for visible damage.
► If the contents are not complete or are damaged as a result of defective
packaging or through transportation contact the service hotline
(see chapter Service).

Unpacking

♦ Remove all components of the device from the carton.
♦ Remove all packaging materials from the device.

Disposal of the packaging

The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
SLS 2000 B2
The recirculation of packaging into the material circuit saves on raw
material and reduces generated waste. Dispose of packaging
material that is no longer needed according to the regionally
established regulations.
devices
GB
MT
47