Publicidad
Idiomas disponibles
Idiomas disponibles
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
If audio material is not playing: brings up the list that
follows the current list. If audio material is playing:
jumps forward to the next word, if the list is indexed, or
by 5 seconds if not indexed.
Pressed to go back to the previous window.
Cancels all examinations conducted in the current
session.
Deletes the current data.
Starts the printout of the current test (if the audiometer is
equipped with the thermal printer).
Sends the current examination to a computer.
Opens a context-sensitive help window.
Allows direct access (without going through the main
menu) to impedance and audiometry tests.
For pure tone audiometry, allows selection of pulsed
mode for presentation of the stimulus.
If enabled, the difference between the intensity of the
stimulus and masking signals is maintained constant,
changing the intensity of the stimulus signal.
When the lock option is selected, the masking tone will
be switched on and switched off together with the
stimulus tone (the masking tone Enable button is
deactivated).
Shows a volume control window for communications
between patient and operator.
(Only for Speech audiometry) Shows a gain control
window for the speech material.
Shows a volume control window for monitor signals
used by the operator.
Selects the stimulation side. For stimulation on both
sides, press the two keys simultaneously.
Selects the transducer for the stimulus channel.
Selects the input signal for the stimulus channel.
Selects the input signal for the masking channel.
Selects the transducer for the masking channel.
Selects the output for acoustic reflex and reflex decay
tests: ipsilateral or contralateral.
For impedance examinations, used to start and stop the
test currently selected.
For audiometric tests, can be used to keep the output of
Publicidad
