Steam Ironing - HAEGER Marbella Manual De Instrucciones

English

Steam ironing

IMPORTANT: Before steam ironing, you should ensure that the garment can be
steam ironing according its marked.
• Set the thermostat control station according to the type of material to be
ironed.
• Adjust steam knob，the steam can be adjusted.
• Do not press the steam button and push the continuous steam slide button,
while the water tank is empty.
• To extend the pump life, the unit's power will cut off automatically if
operating the steam function for more than 10 minutes.
Notes while ironing with steam
If the steam button is operated continuously for more than 30 seconds, drops
•
of water may come from the steam holes in the plate of the iron. It is
recommended that the button is used for shorter periods.
Do not release steam when the iron is standing on its grille rest.
•
During the emission of the steam a vibration is felt coming from the inside of
•
the body: it is the pump that pumps the water from the tank to the iron.
During ironing, if the indicator light goes out from time to time, this can be
•
ignored, as it simply means that the iron is maintaining its correct operating
temperature.
Steam in a vertical position
1) Turn the thermostat control to MAX position.
2) Hang the garment from a hanger and stretch the fabric
slightly with one hand.
As the steam produced is very hot, never iron or steam-iron
a garment while it is being worn but always hang the
garment on a hanger.
3) With the iron held vertically and tilted slightly forwards, press intermittently on
the steam button while moving it from top to bottom. To obtain an extra
burst of steam, press the steam button from time to time. If you use starch,
spray it onto the opposite side.
Burst of steam
The burst of steam feature provides additional steam for removing stubborn
creases. This button also allows you to iron delicate articles of clothing vertically.
This feature is called "vertical burst of steam'. To do so, hang your article of
clothing on a hanger, keep the steam button pressed and pass the iron to and
in front of the article of clothing, making sure that the soleplate does not came
6 Instruction Manual