Beper 50.600 Manual De Instrucciones página 11

Robot Cleaner Use instructions
Description of the appliance: Fig.A
1. Vacuum cleaner
2. Charger adaptor
3. Round brushes (2 pcs.)
4. Filter
5. Wiping cloth (2 pcs.)
Before switch on the appliance check:
(1) whether the dust collecting box is full or not. If it is full empty it.
(2) whether the sucking entrance is blocked by dust or other items, if so let it free.
(3) whether the wiping cloth is aligned with the wiping board, if not it will effect on the rotation of left and right
rear wheels.
CHARGING THE BATTERY:
Before charging, you must power off the appliance.
Charge the appliance for 6-8 hours continuously.
LED FUNCTIONS:
Operating
Operating, and the battery is nearly out.
Charging
The battery is full.
HOW TO DISASSEMBLE OR ASSEMBLE THE ROUND BRUSHES: Fig.B
The brushes can disassemble / assemble only by hands, without any tools.
To assemble the brushes, place the protruding shaft placed in the centre of the brush into the appropriate holes
on the base of the appliance and press slightly.
To disassemble the brushes, turn the product upside down and pull the brushes upward.
The brushes are straight before assembling once assembled will open by themselves.
HOW TO DISASSEMBLE OR ASSEMBLE WIPING BOARD AND WIPING CLOTH : Fig.C
To disassemble / assemble the wiping board and cloth no need any tools, you can do by hand.
1. Press slightly the 4 protruding pins placed on the back of the wiping board into the 4 holes placed on the
bottom of the appliance.
2. If you don't need to use wiping cloth, please remove the wiping board .
3. Apply the wiping cloth on the wiping board by pressing on it.
4. Remove the dirty wiping cloth, and clean it by water, dry it sun than can use again. (Note: the wet wiping cloth
can't be used, otherwise the machine can't work.)
HOW TO CLEAN DUST COLLECTING BOX: Fig.D
1) Open the upper cover upward
2) Remove the cover
3) Remove the dust collecting box lid
4) The remove the dust collecting box
5) Remove the filter cover
6) Empty the box
HOW TO CLEAN THE FILTER AND THE DUST COLLECTING BOX: Fig.E
1) Clean the dust collecting box under the tap. Don't wash it in the dishwasher or other cleaning machine.
2) Let it dry perfectly before install again.
3) Regularly clean the filter surface with a soft brush. Don't wash under the tap.
LED keeps blue constantly.
LED twinkles in blue.
LED twinkles in red
LED keeps red constantly.
11
EN