Climadiff CLS35B1 Manual De Instrucciones página 48

All FRIO wine cellars have a 1-year functional parts warranty.
The EU regulation 2019/2019 and its annexes are available on the European website eur-lex.europa.eu
11. TROUBLE SHOOTING
You can solve many common Wine cooler problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Wine cooler does not operate
Wine cooler is not cold enough
Turns on and off frequently
The light does not work
Vibrations
The wine cooler seems to make too much noise
The door will not close properly
LED display is not working properly
"HH" or "LL" error code
POSSIBLE CAUSE
•
Not plugged in
•
The appliance is turned off
•
The circuit breaker tripped or a blown fuse
•
Check the temperature control setting
•
External environment may require a higher
setting
•
The door is opened too often
•
The door is not closed completely
•
The door gasket does not seal properly
•
Insufficient free space around the appliance
•
The room temperature is hotter than normal
•
A large amount of contents has been added to
the wine cooler
•
The door is open too often
•
The door is not closed completely
•
The temperature control is not set correctly
•
The door gasket does not seal properly
•
Not plugged in
•
The circuit breaker tripped or a blown fuse
•
The bulb has burned out
•
The light switch is "OFF"
•
Check to assure that the wine cooler is level
•
The rattling noise may come from the flow of
the refrigerant, which is normal
•
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
wine cooler
•
Contraction and expansion of the inside walls
may cause popping and crackling noises
•
The wine cooler is not level
•
Check if fan is in good condition
•
The wine cooler is not level
•
The gasket is dirty
•
The shelves are out of position
•
A part of the contents is preventing the door
from closing.
•
Control panel failed
•
Power PCB has broken
•
The appliance is not plugged in
•
The probe is not working
•
Temperature probe is failing
•
Contact your after-sales service
48