Charging Using Car Charger Adapter; Powering Unit & Disc Playback - Impecca DVP-1330 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GETTING STARTED
CHARGING USING CAR CHARGER ADAPTER - The unit can also be
charged or recharged from a car outlet as follows:
Insert the small Car Charger plug from the Car Charger Adapter into
the DC IN jack on the side of the unit.
Insert the Car Charger adapter into the car's cigarette lighter outlet
having 12V DC. Charging will start automatically.
Charging will start automatically showing a red LED.
Once unit is fully charged the red LED indicator light will change to
green.
When the unit is turned ON (using the OFF/ON switch on the left side
panel) the LED on the right will show blue.
NOTES:
Use the enclosed Car Charger adapter for this product only.
Only use the Impecca authorized power adapter included with your
DVD player. Using any other power adapter can damage the unit
and/or cause electrical shock, fire, or even death.
Remove the Car Charger adapter from the outlet when not using for
a long period of time.
POWERING UNIT & DISC PLAYBACK
Important: Remove the plastic screen protector before use.
Lift up the screen panel and turn to desired angle. Slide the Power
ON/OFF switch to "ON" position to power on the player. The blue LED
indicator light on front of the player will light.
Press the OPEN button to open disc door. Place the disc on the center
spindle with label side facing up. Close the disc door and the player
will start playback automatically.
To power off, press the STOP () button to stop the playback and
disc spinning.
NOTES:
The blue LED indicator light will remain lit while ON/OFF switch on
side of player is in the ON position.
Inserting a USB stick or SD/MMC card will load the media menus.
To save battery power, always power off the player by sliding the
ON/OFF switch on the side of player to "OFF" position.
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido