Locinox SlimStone-2-9005 Manual página 13

• All lights flash for 2 seconds, indicating a wrong
code has been entered
• If 5 or more wrong codes are entered
consecutively, you won't be able to use the
SlimStone-2 for a certain period due to safety
reasons. The time out period is specified as
follows :
[number of failed attempts]
2 seconds.
For example : 6 failed attempts result in a time out
period of 64 seconds (2
The time out period is reset when a correct
code is entered, or if no new code was entered
during 2 hours.
8. MAINTENANCE
• Clean the housing and display using a soft cloth,
11. TROUBLESHOOTING
PROBLEM
• All lights are flashing
• The SlimStone-2 lighting is off after pushing a
button
• The SlimStone-2 does not react after entering
the code
• The sequence light remains lit
• The lights flash after entering the PIN code and
confirmation by pressing [#]
12. FREQUENTLY ASKED QUESTIONS
QUESTION
• Is the keypad heated?
• How weatherproof is the SlimStone-2?
• Can I use the SlimStone-2 with sectional doors?
A discarded device can either be returned to your dealer or be sent back to Locinox. This product's
recycling fee is € 0,2.
The WEE marking on the product indicates that it may not be thrown away together with normal
household waste and must be handed over to a designated collection point for the recycling of
electrical and electronic rejects.
As manufacturer of this product, we guarantee that we have taken all the necessary steps in order
to comply with the current safety requirements for this product.
SlimStone-2
seconds)
6
moistened with a neutral cleaning agent
• Never use fuel or chemicals on the device since
they might harm the housing
9. GENERAL INFORMATION
• Please observe the local regulations on the
deposit of packaging material and of appliances
no longer in use
• Our packaging material is eco-friendly. It can be
divided into 2 materials: cardboard (box) and
expandable polyester (buffer).
• Your device is made of recyclable materials
10. WARRANTY
A 2 year warranty covers all electronics
SOLUTION
• When wrong codes have been entered
repeatedly, the SlimStone-2 is blocked.
See 7.2.
• Verify the power supply connection
• Entering a code must always be confirmed with
[#]
• Check if the cables of the override button are
insulated
• Possibly you set a time of 99 seconds
• The entered code does not match any of the
registered codes. See 7.2
ANSWER
• Yes, SlimStone-2 has a regulated heating system
which keeps the keys frost-free
• SlimStone-2 is designed to comply with the IP68
standard
• Yes, by setting the relay hold time to 0, a pulse is
given with which sectional doors can be controlled
EN
13