Domo DO9144M Manual De Instrucciones página 34

Idiomas disponibles

DO9144M

4. Select a speed with the speed control and press the on/off button to mix with the

selected speed. Hold the button pressed. You can adjust the speed during mixing

with the speed control. Or press the turbo button to start mixing immediately at

full speed.

Caution: do not mix for longer than 1 minute continuously.

5. After use, unplug the appliance. Remove the mixer by turning the mixer

clockwise.

Beater

The beater is suitable for beating egg whites, whipping cream, instant desserts, etc.

1. Place the beater on the motor unit and rotate it counterclockwise until it clicks.

2. Put the plug in the outlet.

3. Place the beater directly in the bowl with ingredients. To avoid spattering, do not

hold it slanted.

4. Select the speed with the speed controller and press the on/off button to beat.

Keep it pressed in. It is also possible to adjust the speed with the speed controller

while beating. Or push the turbo button to beat at full speed immediately.

Caution: do not use the beater for longer than 1 minute at a time.

5. When finished, pull the plug from the outlet. Remove the beater by rotating it

clockwise.

Chopper

The chopper is suitable for chopping various types of food. When chopping meat,

remove all bones. Prepare the meat by cutting it into smaller pieces. The maximum

amount of meat that you can mix is 200 g.

1. Place the chopper on a flat surface. Place the knife on the iron pin of the bowl of

the chopper.

2. Add the food.

3. Place the lid on the chopper. Place the motor unit on top of the lid and rotate it

counterclockwise until it clicks.

4. Put the plug in the outlet.

5. Select the speed with the speed controller and press the on/off button to chop.

Keep it pressed in. It is also possible to adjust the speed with the speed controller

while chopping. Or push the turbo button to chop at full speed immediately.

Caution: do not chop for longer than 1 minute at a time.

6. When finished, pull the plug from the outlet. Remove the motor unit of the

chopper by rotating it clockwise.