Publicidad
Idiomas disponibles
Idiomas disponibles
Rubber and Plastics
Do not dry any items made from or containing
rubber or plastics, such as:
• Aprons, bibs, chair covers
• Curtains and tablecloths
• Bath mats
Fiberglass
Do not dry fiberglass articles in the appliance.
Glass particles left in the appliance may be picked
up by your clothes and cause skin irritation.
NOTE
• It is normal for the dryer fan motor to run for
about 60 seconds after the dry cycle is stopped.
• Be careful when removing your clothing from
the appliance, as the clothing or appliance may
be hot.
• The estimated drying time varies from the actual
drying time for sensor dry cycles. The type of
fabric, size of the load, and the dryness selected
affect drying time.
• The Dry Only cycle begins by spinning the
clothing to extract water and save energy.
Using Dry Cycles
Press the Dry button repeatedly to select a dry
cycle.
Normal (
)
@
Reduces the drying time and energy usage during
the dry cycle.
• Fabric Type: Cotton or linen fabrics such as
cotton towels, t-shirts, and linen clothing.
Damp Dry (
)
-
Leaves clothes slightly damp for easier ironing.
• Fabric Type: Cotton or linen fabrics, ready to iron
at the end of cycle.
Low Temperature (
*
Uses low temperature drying to protect clothing.
• Fabric Type: Easy care or permanent press
fabrics.
Energy Saver (
)
(
Heated air-condensing dry that saves water.
• Fabric Type: Cotton or linen fabrics such as
cotton towels, t-shirts, and linen clothing.
)
Time 30/60/120 minutes
Select the drying time according to the load size.
• Fabric Type: Cotton, towels
NOTE
• The capacity of the machine for washing clothes
is twice as much as when drying clothes. If the
machine is to be used to dry a load, then the
wash load must be smaller for effective drying
performance. If a full load is washed, remove
half the clothes prior to starting the dry cycle.
• All dry cycles begin with a brief spin cycle to
extract as much moisture as possible from the
load before drying.
Using a Wash and Dry Function
1
Prepare the laundry and load the drum.
• For consistently dry loads, all articles in the
load should be similar in material and
thickness.
• Do not overload the drum. Items must have
room to tumble freely.
2
Press the Power button.
3
Select a wash cycle.
4
Add detergent.
5
Press the Dry button repeatedly to toggle
through the selections:
• Normal (
) - For general drying
@
• Damp Dry (
) - For damp drying items for
-
ironing
• Low Temperature (
• Energy Saver (
(
• Time 30/60/120 minutes - For timed drying
6
Press the Start/Pause button.
Only Using a Dry Function
1
Prepare the laundry and load the drum.
• For consistently dry loads, all articles in the
load should be similar in material and
thickness.
• Do not overload the drum. Items must have
room to tumble freely.
OPERATION
) - For delicate fabrics
*
) - For heavier fabrics
29
Publicidad
