Skil BY500101 Manual Del Propietário página 151

f. Press the Main Button again. The width will display in the second
row and the area computation will display in the lowest row of the
screen (FIG. 7). The laser will turn off automatically.
g. Press the Main Button again to make a new measurement.
NOTE: When the laser is inactive for 20 seconds, it will
automatically turn off.
Fig. 7
Real-Time Measurement
The real-time measurement function can be used for transferring
measurements, e.g., from construction plans. In the real-time
measure mode, the tool can be moved relative to the target and
will continuously update the displayed distance to the target as
the tool is moved. For example, the user can move from a wall to
a predetermined distance, during which time the actual, changing
measurement is displayed continuously.
a. Press UP Arrow Button or Down Arrow Button to change the
mode to the real-time measurement. The LCD will display "Real-
Time" on the lower right (FIG. 8).
b. Press the Main Button to turn on the laser
Laser Indicator will blink.
c. Press the Main Button to take the measurement; the beeper is
activated and the tool sounds.
M O D E Area M O D E Area
if it is turned off; the
19