Skil BY500101 Manual Del Propietário página 81

Variable-Speed Trigger Switch
Your tool is equipped with a variable-speed
trigger switch. The tool can be turned "ON" or
"OFF" by depressing or releasing the trigger.
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger pres-
sure (Fig.4).
Two-Speed Gearbox Switch
Your tool is equipped with a two-speed
gearbox designed for drilling or driving at LO(1)
or HI(2) speeds. A slide switch is located on
the top of the drill to select either LO (1) or HI (2)
speed (Fig.5).
LO (1) speed provides high-torque and
slower drilling speeds for heavy-duty work
or for driving screws. Use LO (1) speed for
starting holes without a center punch, drilling
metals or plastic, drilling ceramics, or in appli-
cations requiring a higher torque.
HI (2) speed provides faster speeds for drilling
lighter work. HI (2) speed is better for drilling
wood and wood composites and for using
abrasive and polishing accessories.
NOTICE: To prevent gear damage, always allow the drill/driver to come to a complete stop
before changing between High speed and Low speed.
Fig. 4
Fig. 5
2
Two-speed Gearbox Switch
Variable-Speed
Trigger Switch
1
13