Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING THE HOB
WARNING
Risk of cutting.
Be careful of cutting edges.
End parts in foamed plastic – be careful.
During transportation these could cause slight injury or cuts.
Remove all packaging material.
Before proceeding with installation read the work instructions carefully.
STEP.1
Put a towel or cloth on the work surface. Place the hob face down on
the protected surface.
STEP.2
Apply the strip seal, supplied with the hob, which is for sealing it onto
the work surface.
Do not use silicone. Apply the seal to the edge of the bottom of the
hob, leaving about 3mm from the edge of the glass.
Apply the seal all around the circumference.
Cut any excess and bring the two ends of the seal together so they
match.
49
Publicidad
