Descargar Imprimir esta página

Jocel JP4EV002082 Manual De Instrucciones página 59

Placa vitroceramica

Publicidad

Idiomas disponibles

Idiomas disponibles

9.CHILD SAFETY LOCK KEY
✓ The control panel can be locked by pressing and holding the child safety lock key " " for 3
seconds whilst the appliance is under standby status or heating status. The safety lock icon will
display. When the appliance switches off the safety lock icon will extinguish.
✓ Under the child safety lock mode, the "
has set the time, the digital tube will display the time and "
"
" and "
✓ Under the child safety lock mode, you can unlock it by pressing and holding the child lock key "
" for about 3 seconds.
✓ In the child safety lock mode, except for pressing and holding the power key to turn off, as well
as press and hold the child lock key to unlock, the other keys are invalid.
10.PARTITION TIMING
The timer can be timed separately for any cooking zone, and the timing of each cooking zone is
independent of each other.
Single cooking zone timing
When setting a countdown time for a cooking zone, press timer key "
decimal point " "of the selected cooking zone will be on. The decimal point of timer digital tube
" "will display, and to indicate the set timer has been related with the selected cooking zone. At
this time, you can use the plus key and minus key to set the countdown time.
Several cooking zones timing
Each timer setting operation will be same as "Single cooking zone timing".
Press any cooking zone selection key, and the timer digital tube display the timing value of that
cooking zone.
When multiple burners are timed, you can switch the timing of different burners by pressing the
time key "
".
When not selecting any cooking zone, the digital tube will show the minimum timer value of
cooking zones, and the digital tube of corresponding cooking zone will show " ".
11.DEFAULT TIMING
✓ All the cooking zones have default timing function. The relationship of default timing and power
level refers to table below:
Power Level
Default timing(h)
✓ When all the default timing is reached, the cooking zones will switch off automatically and enter
into standby mode.
"
6h
" will display and flash(1s/time). If the cooking zone
1
2
3
6h
5h
59
" alternately. If not, it will display
" first, the digital tube
4
5
6-9
5h
4h
1.5h

Publicidad

loading