Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Location
The tumble dryer should be placed in a ventilated area at a distance of not less
than 10cm from the wall.
It is suggested that there should be no obstacles within 1.5m in front of the tum-
ble dryer to ensure good ventilation of the appliance.
This tumble dryer should be installed in a well-ventilated place where you
can easily put an exhaust duct to vent the steam out of the house.
Levelling
Once you have positioned the appliance in its normal place of operation, make sure that it is completely
level. To do this, you should use a spirit level. If the appliance is not completely level, you should adjust
the legs according to the following figure:
1.
2. Turn the foot until it reaches the floor
3. Adjust the feet and lock the nuts with a spanner.
It is possible that the levelling feet adjustment system may be different from the illustration above and
may be more in line with the following:
Attaching the flexible hose
Connect one end of the threaded hose to the rear ventilation grille and fix it until it is tight.
The other end of the hose will be extended outwards, see the following pictures for the correct mounting
options.
A
Loosen the counter nut
Do not install the dryer outdoors or place it where it can be damaged by rain.
Do not place the back of the dryer near curtains.
Do not place the dryer near a flammable area.
25
English
10cm
B
infiniton.es
Publicidad
