Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3. Get Started
a. Insert the memory card
The camera uses CLASS 6 or above TF card(up to 32GB), please
format the memory card on the computer and install it as shown in
the figure:
b. Install the battery
The camera uses 8x 1.5V AA batteries or 1.5V rechargeable batteries
for power supply, please install the batteries as shown in the figure:
Switch the [Function] to'TEST', the screen will light up, indicating
that the battery is installed correctly.
Notice:
Insert batteries in the specified
direction, and do not mix old and
new batteries. After installation,
the lock must be fastened.
Insert the battery as shown
1. Open the panel lock
2. insert the memory card
Notice:
Turn off the camera before
removing or inserting the
memory card, otherwise the
memory card may be damaged
or data may be lost.
10
+
-
+
-
Publicidad
