Publicidad
Idiomas disponibles
Idiomas disponibles
The potty can be cleaned and disinfected manually or in an autoclave/aqueous decontamination machine. It should be cleaned
after each use.
➢ Seat operation en removal :
➢ Arm operation :
➢
24'' Rear wheel kit - Installation :
➢
Installation of 24'' rear wheel brakes :
DMI-F-06_Annexe 2_Notice.7
V2-25/04/2023
The seat is a horseshoe shape with removable cover for the aperture. When used as a
shower chair, it is recommended that the aperture cover is removed to allow better access
to the occupant for cleaning. Ensure weight is not applied direclty to the aperture cover as
this can fall through the seat. The seat clips on and off the frame. To remove the seat for
cleaning, first remove the potty and aperture cover. The lift up the front for the seat to
release and slide the seat away for the chair. To attach the seat first locate the seat by sliding
the back of the seat into the frame, then press down on the whole of the seat until secure.
The arms can flip up to aid side transfer. Simply lift the front of the arms to flip up, and
then push down to lower. The brakes should always be applied before transferring.
Place the axle support on two of the holes at the required height, ensuring that the
axle points downwards (as shown in Figure B). The brackets can be forward or
rearward facing, depending on the users needs. Insert the two screws into the holes
in the bracket and frame. Secure by attaching the nuts shown in figure B.
Page 13 sur 23
Publicidad
