Ryobi P135 Manual Del Operador página 6

LED FUNCTIONS
See Figure 4, page 9.
MODE LED FUNCTION
Temperature
Delay
Orange Flashing
Battery In
Testing
Error
• Try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED Error status repeats
a second time, try charging a different battery.
• If a different battery charges normally, dispose of the pack that received the Error (see your battery pack manual for
instructions).
• If a different battery also indicates Error, the charger should be replaced.
Charging
Charged
Energy Save
Mode
NOTE: Maintenance information begins on page 7 after French
and Spanish language sections. Illustrations start on page 8.
OPERATION
BATTERY PACK
Hot Battery Pack
Cold Battery Pack
Waiting
Red ON
Deeply Discharged
Red Flashing
Error
Red Fading
Charging
Green Flashing
Battery Full
Green ON
Battery Full /
Energy Save Mode
Green Fading
When battery pack reaches cooled temperature,
charger begins charge mode.
When battery pack reaches warmed temperature,
charger begins charge mode.
Battery is standing by awaiting its turn to charge.
Charger pre-charges battery until normal voltage is
reached, then begins charge mode.
Battery pack or charger error.
Battery is being charged.
Charging is complete; charger maintains charge mode.
Battery pack is fully charged and charger is in Energy
Save mode.
6 — English
ACTION