Descargar Imprimir esta página

Samsung DVE52T7650 Serie Manual Del Usuario página 43

Publicidad

Idiomas disponibles

Idiomas disponibles

My Cycle
You can create your own cycle that
contains your preferred settings, and use it
at your convenience.
1. Turn the Cycle Selector to select a cycle.
The cycle indicator turns on.
2. Set or change the settings (Dry Level,
Temp., Time, etc) and/or options as
necessary. Each corresponding indicator
blinks.
3. Press and hold My Cycle for 3 seconds.
The dryer stores the selected cycle with
its settings.
To use My Cycle, press and hold My Cycle
for 3 seconds.
Smart Care
If the dryer displays an information
code, you can use Smart Care to check
the status of the dryer on a smartphone.
To use Smart Care, you must have the
Samsung Smart Care app installed on your
smartphone.
NOTE
Smart Care is optimized for Samsung
Galaxy and Apple iPhones. (Not compatible
with some models).
Download the Samsung Smart Care app
from the Google Play Store or Apple App
store (Search word: "Samsung Smart
Washer/Dryer"), and install it on your
smartphone.
DV7650T(SEM)_DC68-03784H-00_EN.indd 43
If an information code appears on the
dryer, follow these steps:
1. Press and hold Alarm Off for 3 seconds
to activate Smart Care. The Smart Care
indicator turns on.
2. Open the Smart Care app on your
smartphone.
3. Put the smartphone's camera close
to the display of the dryer. The
app automatically recognizes the
information code, and displays
suggestions on your smartphone.
4. If the smartphone fails to recognize the
information code more than twice, type
the information code manually into the
Smart Care app.
CAUTION
• If light is reflected on the display of
the dryer, the smartphone may not
recognize the information code.
• If you hold the smartphone at an angle
to the dryer's display, the dryer may
not recognize the information code.
For best results, hold the smartphone
so that the front of the panel and the
smartphone are parallel or nearly
parallel.
• After you use this function, the dryer
will delete delete the record of the
information code from its code log.
English 43
2019-11-26
12:26:00

Publicidad

loading