Descargar Imprimir esta página

Husky HOTC8010BL1S Manual De Instrucciones página 19

Publicidad

Assembly
(continued)
5
Installing the drawer liner
□ Place the drawer liners (L) in appropriately sized drawers
and the chest lid area to protect the surface.
L
L
7
Installing the handles on the side locker
□ Remove the handles (A) from the top chest (B) by loosening
the bolts (BB).
□ Attach the handles (A) to the side locker (O) by using two
bolts (BB) for each handle.
□ Tighten all bolts securely with a screwdriver.
BB
A
O
B
6
Installing the casters
CAUTION: Do not over tighten the screws.
Lay the side locker (O) on its back. Use the packaging
material to protect the finish.
Mount the two swivel casters with brake (G) to the
side locker (O) by using four bolts (CC) per caster. The
s wivel casters with brake (G) should be installed on the
end of side locker (O).
Tighten all bolts with a wrench (EE).
CC
EE
8
Attaching the side locker to the cabinet
NOTE: Two people may be required to complete this step.
□ Screw the bolts (CC) on the top chest (B) and rolling
cabinet (E).
□ Return the side locker (O) to its upright position.
Clip the side locker (O) to the bolts on the left side
of the top chest (B) and rolling cabinet (E).
□ Pull the side locker (O) down to ensure it is well mounted.
O
7
Pleas e contac t 1-888-HD-HUSK Y fo r furthe r assistance .
G
Do not fully tighten bolts at this time.
CC
HUSKYTOOLS.COM
O
B
E

Publicidad

loading

Este manual también es adecuado para:

Hotc8010bb1s