Publicidad
Assembly
1
Attaching the side handle
□ Attach the side handle (D) to the rolling cabinet (E)
using four bolts (AA).
NOTE: The holes in the cabinet are tapped and do not
require nuts.
3
Installing the brackets
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□ Attach the brackets (C) to the back of the product to secure
the top chest (B) to the rolling cabinet (E). Place the brackets
over the holes and secure with four screws (DD) per bracket.
□ Tighten all screws securely with a screwdriver.
C
DD
□
AA
D
E
B
E
2
Placing the chest
NOTE: Two people may be required to complete
this step.
□
Attach two handles (A) to the top chest (B) for each
side by using two bolts (BB) per handle.
□ Place the top chest (B) on top of the rolling cabinet (E).
4
Attaching the power strip brackets
□ Attach the power strip brackets (F) to the top chest (B) and
rolling cabinet (E) by using two screws (DD) per bracket.
□
Tighten all screws using a screwdriver.
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
B
E
6
B
A
BB
E
□
F
DD
Publicidad
