LG LFNS22520 Serie Manual De Usuario página 37

SMART DIAGNOSIS
Should you experience any problems with your
refrigerator, it has the capability of transmitting
data via your telephone to the LG ser vice
center. This gives you the capability of speaking
directly to our trained specialists. The specialist
records the data transmitted from your machine
and uses it to analyze the issue, providing a fast
and e ective diagnosis.
If you experience problems with your refrigerator,
call to the LG service center. Only use the Smart
Diagnosis feature when instructed to do so by
TM
the LG call center agent. The transmission sounds
that you will hear are normal and sound similar
to a fax machine.
Smart Diagnosis cannot be activated unless
TM
your refrigerator is connected to power. If
your refrigerator is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis.
TM
Using Smart Diagnosis
First, call to the LG service center.
Only use the Smart Diagnosis feature when
instructed to do so by the LG call center agent.
1
Open the refrigerator door.
2
Hold the mouthpiece of your phone in front
of the speaker that is located on the right
side of the control pad, when instructed to
do so by the call center.
TM
TM
SMART DIAGNOSIS
(Some models).
3
Press and hold the Freezer button for three
seconds while continuing to hold your
phone to the speaker.
4
After you hear three beeps, release the
Freezer button.
5
K eep the phone in place until the tone
transmission has nished. This takes about
3 seconds, and the display will count
down the time. Once the countdown is
over and the tones have stopped, resume
your conversation with the specialist, who
will then be able to assist you in using the
information transmitted for analysis.
NOTE
For best results, do not move the phone
while the tones are being transmitted.
If the call center agent is not able to
get an accurate recording of the data,
you may be asked to try again.
NOTE
Call quality di erences by region may
a ect the function.
Use the home telephone for better
communication performance, resulting
in better service.
Bad call quality may result in poor data
transmission from your phone to the
machine, which could cause Smart
TM
Diagnosis to malfunction. .
36