Llaves de lavamanos de dos manijas de mini-extensión (8 páginas)
Resumen de contenidos para Delta CASSIDY 4197-DST Serie
Página 1
Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: ® • To READ ALL the instructions completely before beginning.
Página 2
à compter de la date d’achat. Aucune pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta garantie ne couvre les piles.
Página 3
▲Specify Finish RP73941▲ ▲Especifíque el Acabado Top Cap Remate superior ▲Précisez le Fini Capuchon supérieur RP71543▲ Soap Dispenser (optional) Dispensador de jabón (opcional) Distributeur de savon (facultative) RP73940▲ Wand Assembly Ensamble de la Cabeza del Rociador RP47888 Bec-douchette Pump & Bottle Bomba y Botella RP73942 Retainer...
Página 4
OPTIONAL / OPCIONAL / FACULTATIVE Optional Escutcheon Installation Mount Faucet to Deck For optional installations using the 10 1/2" Your faucet is designed for a hole diameter of Secure faucet to sink with washer and escutcheon, order RP71545 (specify finish) 1 3/8"...
Página 5
Loop tubing created. Delta is not responsible for tubing that is l Tubing is cut too short: buy a coupling union and a (2) if it is too long. Note: Recommended tubing...
Página 6
Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el corte boca abajo. esté recto. Custom Fit Connections - Plastic Sleeve Installation Instructions 1.
Página 7
Flush Supply Lines Because your sprayer has been factory assembled to the hose, we do not recommend removing to flush the lines. Instead, if Clip Installation possible, we recommend placing a bucket below the outlet fitting and one of two options. Insert hose end (1) through hose weight assembly (2).
Página 8
Maintenance If faucet exhibits very low flow – Unscrew hose from spray head and clean debris from screen (1) (the screen is located just inside the spray) . IMPORTANT: Reinstall screen to the spray head (failure to reinstall the screen could damage internal parts).