Descargar Imprimir esta página

TREVIDEA Girmi MX39 Manual Del Usuario página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
cleaning or foods removing. CAUTION! Always
unplug unit from electrical outlet each after use
and/or before touching blades and/or before installing
or removing any accessory or attachment.
To clean shaft and accessories, it is recommended using
warm tap water and containing the use of detergents.
When cleaning with detergents, rinse thoroughly.
Do not immerse the top of the mixer in water or other
liquids, clean it with a damp cloth.
PARTS MX39
1. Function lights
5. Cup
9. Whisk
OPERATING
STAINLESS STEEL IMMERSION SHAFT
Assemble motor housing to the immersion stainless-steel shaft as described in the "Assembling the shaft"
section. Plug the unit to the electrical outlet. Insert the mixer in the bowl with the food to blend (ensure to
immerse the entire blade to avoid any splashing). Press the button (speed I or II) to start operating. For best
results, follow the instructions in "Setting processing speed" section.
CAUTION! Do not insert your fingers inside the bowl containing food
-
Unplug the hand blender from the electrical outlet, once finished working,
This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milk shakes,
sauces, juices, cocktails, soups, vegetable soup, etc. ... When processing fruits or vegetables, add also a small
quantity of water to allow the device to operate in a homogeneous way.
Insert motor body (4) in the shaft (6). Rotate anticlockwise until it blocks. For unblocking, rotate clockwise.
SETTING THE WORKING SPEED
The unit features two working speeds (2 and 3 button). For best results and to avoid overheating, it is
recommended to use the unit for short and regular intervals, then for a long time, always making circular
movements inside the container of food. It is also recommended to start processing food from the first speed,
ending up using the faster speed.
WHISK ATTACHMENT
-
Assemble chopper set as described in the "Assembling the whisk" section.
-
Plug the unit to the electrical outlet.
-
Press the button (speed I or II) to start operating.
CAUTION: do not insert your fingers or hair inside the food container.
-
Unplug the unit from the outlet once the process is finished.
The whisk attachment is ideal for creating sauces and cream and for whipping and whisking.
Insert the pin of the whisk (9) into the attachment (8).
Insert body (4) in attachment (8) and Rotate anticlockwise until it blocks.
2. Switch low speed
6. Immersion shaft
10. Chopper lid
Assembling the shaft
Assembling the whisk attachment
3. Switch high speed
7. Blades
11. Chopper bowl
4. Motor body
8. Whisk attachment
12. Chopper blades
10

Publicidad

loading

Este manual también es adecuado para:

Hb-758