Kuzar HAMMER 40 Manual De Instrucciones página 3

Industrial Lifter HAMMER 40
3. - SAFETY PRECAUTIONS.
3.1 - The HAMMER is a machine designed to elevate loads upwards in
a vertical direction, It should NEVER be used as a platform to elevate
people.
3.2 - Only place the lift on hard, flat surfaces always checking that it is in
a vertical position by using the bubble level indicator found on the base.
Adjust the leg stabilizers by turning the handles to level if necessary.
NEVER use wedges or other foreign objects to balance the lift.
3.3 - The maximum load indicated on the characteristics label and the
instructions manual should not be exceeded.
3.4 - This lifter should NEVER be used to elevate a load that has not
been properly checked. It is necessary to verify that the load is correctly
supported and centred on the appropriate lift support so that the weight
of the load will only elevate in a vertical direction.
3.5 - Check that the legs are placed and set-up correctly with their safety
pins inserted and locked.
3.6 - NEVER use the lift on a vehicle or any other mobile surface.
Manual in ENGLISH
KUZAR SYSTEMS S.L. 3