Zanussi ZFV619K Manual De Instrucciones página 27

Function
5
Maximum speed
Filter notification
6
7
Lamp
3. DAILY USE
3.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or
burners.
While boiling and frying big quantities of food without a lid, big humidity.
It is recommended to leave the
hood operating for approximately
15 minutes after cooking.
The control Panel is a sensor
field. To operate the hood touch
the symbol exactly in the middle
for at least 1 second.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the
symbol.
The hoods light works
independently to other hood
functions. To illuminate the
cooking surface touch
To turn off the appliance press the
again.
Description
The motor switches to maximum speed.
Reminds to change or clean the charcoal filter and clean the grease
filter.
Turns the lights on and off.
3.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
3.3 Activating Maximum Motor
Speed
When you touch
Speed starts to operate for minutes. After
that time, the appliance returns to its
.
previous speed settings.
symbol
For more information how to use
the function refer to the hob user
manual.
, the Maximum Motor
When the function is turned on,
additional touch on
have any effects.
does not
ENGLISH 27