Descargar Imprimir esta página

Philips HU4814 Manual Del Usuario página 12

Ocultar thumbs Ver también para HU4814:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
4
Clean the inside of the water tank
with a soft clean cloth.
5
Empty the water tank into a sink.
6
Put the humidification filter and the
filter support back into the water
tank.
Clean the humidification
filter
Clean the humidification filter every
week to keep it hygienic.
1
Take out the humidification filter
and the filter support from the water
tank (fig. o).
2
Remove the humidification filter
from the filter support (fig. p).
3
Soak the humidification filter in tap
water for one hour (fig. q).
4
Rinse the humidification filter
under a slowly running tap. Do not
squeeze or wring the filter when
cleaning (fig. r).
5
Let excess water drip off the
humidification filter.
6
Assemble the humidification filter
round the filter support (fig. d).
7
Put the humidification filter and the
filter support back into the water
tank (fig. e).
8
Put the upper unit back onto the
water tank (fig. g).
Note
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
EN
10
6 Replacing the
humidification
filter
Replace the humidification filter every
three months for optimal performance.
If the filter is in good condition, you
could use it for a longer period of time.
Make sure to replace the humidification
filter at least once a year.
Note
Use only Philips original humidification
filter FY2401.
Always unplug the humidifier before you
replace the humidification filter.
Tip
Register your product at
www.philips.com for further information
on how to replace your filter.
1
Take out the humidification filter
and the filter support from the water
tank (fig. o).
2
Remove the humidification filter
from the filter support. Discard the
used filter (fig. s).
3
Remove the packaging material from
the new humidification filter (fig. c).
4
Assemble the new humidification
filter around the filter support (fig. d).
5
Put the filter and the filter support
back into the water tank (fig. e).
6
Put the upper unit back onto the
water tank (fig. g).
Tip
You can easily find more information
about how to replace the filter in our
web page or by calling our Consumer
Care Center.

Publicidad

loading