Publicidad
Idiomas disponibles
Idiomas disponibles
RUN
ES
▶Always place the appliance on a stable and flat surface. Boiling
water and steam can cause severe burns.
▶Do not handle any electrical element.
PT
▶Before connecting to the power outlet, make sure that the voltage
indicated on the label located on the bottom of the base is the same
as the voltage in your home. Otherwise, do not use the device and
return it to your dealer.
EN
▶To avoid electrical hazards, never put the power base in water or any
other liquid, and do not allow water to get on electrical parts.
FR
▶The exterior of the appliance will become very hot during use. You
always have to be careful when handling it. Never touch/lift the
appliance, once the water has boiled, by any part other than the
handle.
▶Always make sure the appliance is turned off before removing it from
the power base. And that it is unplugged before cleaning it or when
it is not in use.
▶Be careful with the steam coming out of the spout or lid.
▶This appliance is designed for normal household use only. It should
not be used for anything other than its intended purpose.
▶Do not use this appliance outdoors.
▶Do not place the appliance on or near surfaces that are potentially
inflammable or that are affected by heat, for example: wood, plastic,
curtains, the oven...
▶Do not let the power cord touch hot surfaces or become entangled.
▶Do not use this appliance if the power cord or plug is damaged, or if
the appliance malfunctions or is damaged in any way. Check power
cord regularly for signs of damage/wear.
▶Do not open the lid while the kettle is boiling. Watch out for the
steam that comes out once it's done.
▶Do not fill the kettle above the MAX mark. Boiling water may splatter
if overfilled.
▶The appliance contains no user-serviceable parts. This appliance is
designed for use in domestic applications such as: kitchen areas,
offices, and other work environments; country houses; for clients in
hotels, motels and other residential type environments...
Instruction manual
KETTLE PARTS
1. Steam switch
2. Handle
3. Lid
4. Water level gauge
5. Body
6. Indicator light
7. Support with power cord
STARTED
1. 1. Always remove the kettle from the electric base before
filling it.
2. Lift the cover.
3. Fill the kettle with cold water between the MIN and MAX
marks on the water level indicator.
4. Replace the lid and place the kettle back on the electric
base. Make sure the lid is tightly closed before you bring it
to a boil.
5. Plug the power base into the wall outlet and turn it on at
the mains.
6. To start boiling, press the ON/OFF switch down.
7. The power indicator will light up and the kettle will begin
to boil.
NEVER REMOVE LID DURING BOILING.
8. When the water has boiled, the kettle will automatically
turn off and the power indicator will turn off.
ref. 07656
Publicidad
