Air Circulation Operation; Auto Clean Operation; Neo Plasma Purification Operation (Optional) - LG SL182CR NC0 Manual Del Propietário

Air Circulation Operation

Auto Clean Operation

During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy
dehumidification operation can be removed.
PLASMA Purification Operation (Optional)
Plasma purification operation can be started by pressing the PLASMA BUTTON on the
remote controller.
Repressing it will deactivate the operation.
NOTE
• This features can be used in any operation mode and fan speed by pressing the plasma button.
• Separate plasma purification operation is possible in stop condition. It is cancelled by pressing plasma
button or on/off button.
This operation circulates the air without cooling or heating.
It can be activated by pressing the AIR CIRCULATION BUTTON.
Once the air circulation is activated you can select the fan speed by
pressing the INDOOR FAN SPEED SELECTION BUTTON.
Select Auto Clean Operation by the function setting button(
Now whenever the unit is turned off, the indoor fan is still running for
about 30 minutes internally without cooling or dehumidification
operation. This function dries up any remains of moisture & cleans
the unit internally. If you push the Auto Clean button again, this function is
cancelled.
NOTE
During Auto Clean fuction, only ON/OFF button, Plasma button, Auto Clean
button is used. During this operation, 'Cooling Lamp' lights up.
Plasma filter is a technology developed by LG to get rid of microscopic
contaminants in the intake air by generating a plasma of high charge
electrons. This plasma kills and destroys the contaminants completely to
provide clean and hygienic air.
Operating Instructions
AUTO CLEAN
).
AUTO CLEAN
Owner's Manual 13