Before Reading the simple owner's manual
Any malfunction in the built-in solid state drive (SSD) may result in loss of
stored data. You must back up all critical user data to an external storage
device (USB HDD, memory card, etc.).
If you shut the system down before it is completely loaded, the product may
not shut down properly. Shut down the system after it is completely loaded.
(It takes about one or two minutes to completely load the system and may
vary depending on the conditions.)
Precautions related to OS installation
This product is not provided with the operating system.
LG Electronics does not provide the operating system (e.g. MS Windows)
for this product. You must purchase and install the operating system that is
required to operate the product. To purchase a Windows OS, please contact
Microsoft.
This product only supports installation of Windows 10 IoT Enterprise, and we
are not responsible for all the problems that may occur due to installing and
using other operating systems.
Before Reading the simple owner's manual
Product Components
The components shown below are provided when you purchase the product.
Check the components before use.
• Some of its components may look different in shape and color from the pictures in certain
models.
• When cleaning the product, use a cleaning agent dedicated to the PC. If you use thinner,
benzene, alcohol or other similar agent, the product may be damaged or deformed.
PC Main Body
Simple Owner's
1
AC Adapter
Manual
1 The AC adapter and power cable may differ depending on your country, but there is
no difference in their functionality.
2 The recommended network cable for the optimal network environment is CAT5 or
higher.
Windows 10 Installation Guide
If you purchase and install Windows 10 IoT Enterprise, you should perform
installation according to the following procedure.
For details on installation, refer to the user's guide or the Help menu provided
with the Windows OS.
Installing
Installing
Windows
Drivers
1
2
LAN Adaptor
1
Power Cable
(optional)
Windows
Windows installation
Update
complete