Publicidad
2
English
• Flash EPROM for easy BIOS upgrades
• Supports DMI 2.0 function
Desktop Management Interface (DMI)
The system board comes with a DMI 2.0 built into the BIOS. The
DMI utility in the BIOS automatically records various information
about your system configuration and stores these information in the
DMI pool, which is a part of the system board's Plug and Play
BIOS. DMI, along with the appropriately networked software, is
designed to make inventory, maintenance and troubleshooting of
computer systems easier.
2.1.2 System Health Monitor Functions
The system board is capable of monitoring the following "system
health" conditions.
• Monitors system temperature and overheat alarm
• Monitors 5VSB/VBAT/3.3V/5V/±12V/CPU voltages and failure
alarm
• Monitors the fan speed of the CPU fan, chassis fan and system
fan; and failure alarm
• Automatic chassis fan on/off control
• Read back capability that displays temperature, voltage and fan
speed
• Opened chassis alarm (optional)
If you want a warning message to pop-up or a warning alarm to
sound when an abnormal condition occurs, you must install the
"Hardware Doctor" utility. This utility is included in the CD that came
with the system board.
2.1.3 Intelligence
Automatic Chassis Fan Off
The chassis fan will automatically turn off once the system enters the
Suspend mode.
Dual Function Power Button
Depending on the setting in the "Soft-Off By PWR-BTTN" field of
28
Publicidad
