Troubleshooting; Warranty Information; Controlador De Temperatura En Línea - BriskHeat BH-330 Operación Manual

BH-330 Inline Controller Operation Manual
7

Troubleshooting

After over-heating, the PCB itself needs time to cool down. At lower temperatures, < 85°C, the control-
ler can be restarted by a short disconnection from power.
For security reasons, any short interruption of the sensor signal will lead to a stand-by of the controller.
EU: Declaration of Conformity
Directives: Directive 2014/35/EU Low Voltage Directive
Directive 2014/30/EU Electromagnetic Compatibility
Emission Immunity: EN 61000-6-4:2011, EN 61000-6-2:2006
8

Warranty information

BriskHeat warrants to the original purchaser of this product for the period of eighteen (18) months from
date of shipment or twelve (12) months from date of installation, whichever comes first. BriskHeat's
obligation and the exclusive remedy under this warranty shall be limited to the repair or replacement, at
BriskHeat's option, of any parts of the product which may prove defective under prescribed use and
service following BriskHeat's examination, is determined by BriskHeat to be defective. The complete
details of the warranty can be found online at www.briskheat.com or by contacting us at 1-800-848-
7673 (toll free, U.S. / Canada) or 1-614-294-3376 (Worldwide).
Corporate Headquarters:
4800 Hilton Corporate Dr.
Columbus, OH 43232, U.S.A.
Toll Free: 800-848-7673
Phone: 614-294-3376
Fax: 614-294-3807
Email: bhtsales1@briskheat.com
®
© BriskHeat Corporation
Europe:
P.O. Box 420124
44275 Dortmund, Germany
®
. All rights reserved.
7
Controlador de
temperatura en línea
BH-330
Manual de operación
Debe leer y comprender este manual antes de instalar,
hacer funcionar o reparar este producto. La falta de
comprensión de estas instrucciones podría causar un
accidente con lesiones graves o la muerte.
Conserve estas instrucciones para futuras consultas.
8