Basic Operation - Panasonic CS-PS36RKV Instrucciones De Operación

Quick guide
■ How to load batteries
1
3
5
3
1
2
The illustrations in this manual are for explanation purposes
only and may differ from the actual unit. They are subject to
change without notice for future improvement.

Press at "OPEN" mark
on remote control back
cover and then push it
to align with ◆ symbol
on remote control body.

Lift up to remove the
2
back cover.

Load the batteries.

Align the ◆ symbol on
the cover and the unit,
4
and then press down
to secure.

Push upwards to lock
the cover.

Basic operation

1 Select the desired mode
AUTO
2 Start/stop the operation
• Please note that the "OFF"
indicate on remote control
screen as below:
To stop:
When you start this unit, the
"OFF" will vanish from the
remote control screen as below:
To start:
and indoor unit "POWER" LED
will illumnate as below:
3 Select the desired temperature
• Selection range:
16 °C ~ 30 °C.
• Operating the unit within the
recommended temperature
may save energy.
COOL: 26 °C ~ 28 °C.
8m
DRY : 1 °C ~ 2 °C lower than
room temperature.
• Use remote control within 8 m
from the remote control receiver
of the indoor unit.
Table of contents
Safety precautions .................. 14-15
How to use.............................. 16-17
To set the timer .............................18
Cleaning instructions ....................19
Troubleshooting ............................20
Information....................................21
COOL DRY
POWER
Accessories
• Remote control
• AAA or R03 or LR03 batteries × 2
• Remote control holder
• Screws for remote control
holder × 2
13