Descargar Imprimir esta página

Roadstar RU-285RD/HP Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
SELECT (2) button shortly until the desired functions is shown on the display. Figure 1
shows how control functions are selected using the SELECT button.
1. VOLUME (rotate knob)
2. SELECT (push down)
3. BASS
4. TREBLE
5. BALANCE
6. FADER
7. LOUDNESS ON / OFF
8. DSP (ROCK - POP - CLASS - SDP OFF)
9. TA Volume
10. REGIONAL ON / OFF
11. DX / LOC
12. STEREO / MONO
3. VOLUME CONTROL
Rotate the VOLUME knob to increase or decrease the volume. This knob can be used to
adjust the BASS, TREBLE, BALANCE and FADER.
This knob also selects the possible options in RDS function.
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function. Turn the volume knob to select:
AF ON / OFF
To switch the AF (Alternative Frequency) ON or OFF.
TA ON / OFF
To switch the TA (Trafic Alarm) ON or OFF.
TA SEEK/TA ALARM (2)
TA SEEK Mode or TA ALARM mode.
- TA SEEK mode:
When newly turned station does not receive TP information for 5 sec., the radio retunes
to next station which has not the same station (PI) as the last station, but has the TP
information.
In TA seek mode, the current station can be changed to the completely different station
because the unit searches TP station when the field strength of the current station is
All manuals and user guides at all-guides.com
English
7
8
PI SOUND / PI MUTE
RETUNE L / RETUNE S
BEEP MODE (2)
4. PRESET STATIONS (1,2,3,4,5,6)
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (Euro-
English
very weak, or the current station has no TP signal.
- TA ALARM mode:
Any automatic retune mode is not activated, just can be heard Beep sound.
– PI SOUND
When a car cruises some special area which has different PT code with same AF.
PI sound (DIP) is heard once in a while, the DIP's sound will be heard for less than 1
second.
– PI MUTE
Under the above same situation, a mute sound will be heard for less than 1 sec.
The initial time of automatic TA search or PI search mode is selected.
When PI information is not caught for retune time, the radio start to retune to next same
PI station. When same PI station does not catch 1 cyclic search, the radio goes to last
station and waits for 4-5 minute until PI code is received.
When press the SEL button for more than 2 seconds, it is activated as selecting mode
of these function. Turn the volume knob to select:
BEEP ON: BEEP sound can be heard from speaker whenany buttons are pressed.
BEEP OFF: to disable the BEEP option.
(A) RADIO MODE:
When pressed short, these keys select a preset station directly. When pressed longer
than 1 sec., current station is stored in preset memory bank. When PTY mode is se-
lected, the PTY switch is shared as follows:
PTY music group ---- PTY speech group ---- OFF
MUSIC
SPEECH
1. POP M, ROCK M
1. NEWS, AFFAIRS, INFO
2. M.O.R. M, LIGHT M
2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M
3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY
4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES
5. SOCIAL, RELIGION, PHONE IN
6. FOLK
6. TRAVEL, HOBBIES, DOCUMENT

Publicidad

loading