Publicidad
Idiomas disponibles
Idiomas disponibles
5. Device description
1. Light area
2. Skin colour sensor/skin contact sensor
3. Intensity display (3 levels)
4. ON/OFF/power selection button
Safety features
The device has a skin colour sensor. This skin colour sensor prevents you from treating
your skin if it is too dark or too tanned.
The device also has a built-in UV fi lter that blocks harmful UV rays.
The device has a built-in skin contact sensor to protect the eyes. The sensor was devel-
oped so that no light pulses can be emitted when the device is held in the air. A light pulse
is only emitted when the skin contact sensor is in full contact with the skin.
6. Initial use
Before you can start the application, you must fi rst complete the following:
1. Using the hair and skin colour chart (on the back page of these instructions for use),
check which intensity level is suitable for you. An "x" in the table indicates that the
device is not suitable for you to use.
2. Before each application, shave the body parts that you wish to
treat. Do not use a hair removal cream instead of a razor.
3 4
6
5
1
2
5. Indicator lamp
6. Trigger button
7. Socket for device plug
34
7
Publicidad
