LG LDPN676 Serie Manual Del Propietário página 25

Control Panel
Control Panel Features
LDPN676** Only
Power On/Off Button
a
• Press this button to turn the washer on or off.
• After the cycle is complete, the power automatically turns off for purposes of safety and economy.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
• When power is connected again, the dishwasher will turn on automatically and resume the cycle.
Display
b
• : Rinse Aid Icon
e
- This icon illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- Refer to the Rinse Aid Dispenser Adjustment section.
• : Machine Clean & Sanitized Icon
a
- The Machine Clean icon flashes every 30 cycles. To activate or deactivate the icon, press the
Delicate button for three seconds.
- If the High Temp option is added to a cycle, the Machine Clean icon stays lit at the end of the cycle
if the dishes were properly sanitized.
• : Digital Display
8:88
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.
NOTE
• The estimated time shown on the display does not include delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay time in hours.
OPERATION 25