Glacier bay 1002356808 Guía De Uso Y Mantenimiento página 12

Installation (continued)
10
Adjusting the temperature
B
Removing the red limit stop ring
□
Remember the position of the red limit stop ring (1)
on the cartridge assembly (2). Remove the red limit
stop ring (1) from the cartridge assembly (2).
C
Adjusting the desired maximum
water temperature
□
For colder water, adjust the red limit stop ring (1) in a clockwise direction and reinstall the red limit stop
ring (1) onto the cartridge assembly (2).
□
For hotter water, adjust the red limit stop ring (1) in a counterclockwise direction and reinstall the red
limit stop ring (1) onto the cartridge assembly (2).
NOTE: A thermometer (not included) can be held in the
running water to aid in reaching the desired water
temperature.
For colder water
1
For hotter water
1
12
1
2