Publicidad
Idiomas disponibles
Idiomas disponibles
variation based on product components, temperature and end-user
application.
Proper Hand Position (Fig. 5)
WARNING: To reduce the risk of serious personal, injury, ALWAYS
use proper hand position as shown.
WARNING: To reduce the risk of serious personal, injury, ALWAYS
hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle (D).
FIG. 5
Worklight
(Fig. 2, 6)
There is a worklight (G)
located on the foot of
the tool. The worklight is
activated when the trigger
switch is depressed, and
will automatically turn off 20
seconds after the trigger switch is released. If the trigger switch
remains depressed, the worklight will remain on.
NOTE: The worklight is for lighting the immediate work surface and is
not intended to be used as a flashlight.
Speed Selector (Fig. 8)
Your tool is equipped with a speed selector (I) which allows you to
select one of three speeds. Select the speed based on the application
and control the speed of the tool using the variable speed trigger
switch (A).
D
NOTE: Output torque is dependent
on the speed selected, with the
highest provided in Speed 3
13
FIG. 6
G
Speed 1
0–400 rpm
Speed 2
0–1200 rpm
Speed 3
0–1900 rpm
FIG. 8
Publicidad
